The LED Engineered Wall Light Surface Mount is an attractive Solid Sand-Cast Bronze with a solid copper bracket with two mounting holes for easy mounting.
Body: 6.0″ wide x 1.1″ tall x 1.4″ deep
CEWL6CB: 12V T-3 10W glass wedge-base xelogen halogen lamp (10,000 hr.), (rated 18W max.) Lamp included. Note for units produced prior to 12/10: 18W T5 lamp may also be used, but requires slight fixture modification (see technical note).
CEWL6LED1: Integrated LED board thermally bonded to fixture casting.
Estimated Life (L70: 60,500 hrs., 5-year warranty
Input Power: At 12 volts AC – 3 watts; at 12 volts DC – 3.6 watts
Input Voltage: Accepts 8 to 18 volts (AC or DC). For DC operation, unit is polarity independent.
Input Current: 0.26 amps
Power factor: 0.80 +/- 0.10
Surge Protection: TVS Transient Voltage Suppressor (36V)
LED Current Regulation: 5% across voltage range
Light output from LED array: 105 lumens (avg.)
Light output from luminaire: 75 lumens (avg.) (8 – 15% greater for DC)
Luminous Efficacy: 20 – 30 lumens per watt
Color Temperature (CCT): 2,700° K (avg.) (warm white)
Color Rendering Index (CRI): 85 typical
Operating Temperature: -4° to 120° F (-20° to 50° C)
Moisture Protection: conformal coating assembly (except LED lens)
Thermal Management: Assembly is thermally bonded to fixture body; LED Junction: 63.0° C @25° C ambient
Light Source: (2) Nichia LED’s with constant current driver
No electrolytic capacitors, includes all high-temperature components
UL 1838 Listed Low Voltage Luminaire for wet locations (Incandescent version only – UL Listing for LED version expected in late 2011).
This product complies with FCC Class B emissions standards for residential environments.
Body: Solid Sand-Cast Bronze
Bracket: Solid copper with two mounting holes.
Internal Reflector: mirrored aluminum reflector
Lens: Frosted soda lime glass
Socket Assembly (CEWL6CB): High-temperature wedge-base socket
Wiring: Tin-coated #18-2 No-Ox marine-grade wiring (inside fixture and external 25 ft. lead)wire crimped and soldered to lead wire using tin solder and tin crimps protected with waterproof shrink tubing and fiberglass sleeve.